Below are the available bulk discount rates for each individual item when you purchase a certain amount
This Yuminashi nylon roller weight set which is produced at the PAYU company in Japan includes 6 roller weights (6x10gr.) and is a really nice value for money product!
These rollers can be installed in all first generation HONDA PCX125 engines, and in all next generation HONDA eSP engines like:
- HONDA PCX125 V2&V3
- HONDA PCX150 V1&V2
- HONDA SH125i ABS
- HONDA SH150i ABS
- HONDA VARIO TECHNO 125
- HONDA VARIO TECHNO 150
- HONDA CLICK125i
- HONDA CLICK150i
- HONDA LEAD125, etc...
The 10gr roller weights can be used on stock 125cc and 150cc engines for city traffic or longer distances at top speed where the top speed will be higher as with your stock roller weights, and it will be easier to reach top speed each and every time once these are installed.
With these 10gr roller weights the RPM's while driving at a very slow traffic jam speed are very well balanced.
If you have a brand new 150cc engine in your bike, then the 10gr roller weights are the way to go, they will give you very good acceleration and you will able to reach top speed each and every time.
If your engine is not that new again, and the compression is not anymore as what it was brand new, then the 9gr rollers will be a better option for you.
If you are not sure which weights to use on your stock 125cc or 150cc engine, then a suggestion is to order 1 set with 8gr roller weights and 1 set with 10gr roller weights.
With these 2 roller weight sets you can try 3 different combinations then which are 6x8gr, 6x10gr and a 3x8+3x10gr combination which would be a very good idea to do with a 125cc engine.
If you have a 150cc engine, then it would be a good idea in your search for the right balance to order 1 set with 9gr rollers and 1 set with 10gr roller, like this you can also make a 3x9+3x10gr combination.
If you have a stock 125 or 150cc engine you should not think about going heavier as 10gr roller weights....
If you have a 164cc kit or a higher cylinder displacement installed on your engine then you should use 12gr roller weights.
The rollers should be checked/changed every 1600km/1000 miles (per maintenance schedule) to keep your scooter running tops. Over time, roller weights will develop flat spots which will impair the performance of your scooter. One will have this sooner as others and this based on the performance from your engine, your personal drive style and your variator type (Speed Booster variators will need to replace sooner the roller weights compared to the Sprint Master variators).
If you spend a lot of time on top speed then this will demand a lot more from both, your roller weights and your v-belt, so both will need to be replaced sooner in this case as if it would be the case for someone with a moderate drive style.
A good indication that your rollers are worn is increasingly high revs for a given speed and/or decreased top speed.
Replacing worn rollers with this set will restore, and actually improve your low-end power and especially your top speed. Fuel efficiency will also improve dramatically!
All prices are in USD