Currency Displayed in
Below are the available bulk discount rates for each individual item when you purchase a certain amount
● GENUINE KEIHIN 120CC/MIN A-TYPE (6-HOLES) G-INJECTOR
● The 120cc/min flow rate of the G-injector (A-Type) can be used in a 110cc 2-valve engine and even in a 125cc engine such as the Innova125i which normally have only a 90cc/min flow injector installed, the result will be more torque compared to the stock injector.
Please check the guide below for the recommend injector flow for your engine.
Z50 PGM-FI MONKEY & C50 SUPER CUB FI have stock an A-Type injector.
※ If your stock injector is 90cc/min such as the Innova125i (please scroll down how to read your injector below), and if you want to change your fuel to E85, then we recommend to install this 120cc/min injector such as the A-Type G-injector LINK to have a good fuel economy and 130cc to have some more torque in combination with E85.
Rule of thumb here is the injector flow rate/min you have selected to run with normal fuel times 1.3 to get the flow rate/min with E85.
SMART SHOPPER TIP:
※ BUYING MORE THEN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
● INJECTOR READING:
How to know which injector you have, and which one should be the right one to replace it to have the same fuel rate, or a higher fuel rate then you already have installed?
With the guide below you can see based on the injector "name" which injector you have installed in your bike, and which one you should take to make your bike run richer or leaner.
Keep in mind that you first need to know if you have an A-Type injector, or a B-Type injector.
With the A-Type injector, the letter on top of the injector tells you the "name" of the injector.
With the B-Type injector it is actually the opposite, because the letter, or letters below, are telling you the "name" of the injector.
How to recognize an A-Type and B-Type injector?
Well, it's actually easy to see because the A-type injector is perfectly round and smooth, while the B-Type injector have these Pins left and right that protrude, it not perfectly round and smooth at all.
※ If you have the large throttle body model, with the large square sensor block, then you can install both injector types on your throttle body, you only need to buy the correct injector joint, and possibly the correct wire loom if the A-Type or B-Type injector wouldn't be the stock injector type of your bike...
● INJECTOR NAMES & FLOW RATES FOR A-TYPE INJECTORS:
● INJECTOR NAMES & FLOW RATES FOR B-TYPE INJECTORS:
All prices are in THB