Below are the available bulk discount rates for each individual item when you purchase a certain amount
● Ø28MM 2021-TYPE YUMINASHI THROTTLE BODY SET (MSX/GROM125 - Z125 MONKEY - CRF110F...)
● The large throttle body type is well know for having the biggest potential to generate the most horsepower.
The downside however from these throttle bodies is that they are using a 5-pin connector with a large type of TP/map sensor block installed.
The large type of TP/Map sensor makes them not only really expensive, but also a kind of impractical because you can't install them without using an additional 5-pin to 3-pin wire loom, and this on most of the 110i and 125i engines.
● With the new 2021 Yuminashi throttle body type Yuminashi has worked the solution out with a blend of the large throttle body and the stock 3-pin TP connector to make this new throttle body type a real plug and play experience without any wiring loom involved.
It has also the manual idle air screw, as stock on 110 and 125 throttle bodies, so it's actually child's play to adjust/set the idle with a simple screwdriver.
● The injector is installed on top of the throttle body where the spraying fuel mist makes a perfect mixture with the incoming air stream, and this spray has also a cooling effect on the manifold.
This throttle body set allows you to flip the manifold 180 degrees around to create a ram air filling effect, without the need for an additional bended intake tube.
Bends and curves are the enemy of horsepower, so if you point the throttle body in to the driving direction the ram air goes straight in to the cylinder head without any additional bends or curves.
If you install the throttle body in the driving direction then the injector joint will be pointed backwards, towards the fuel tank, and the throttle cable holder forwards to make an easy connection of both possible.
※ If you would like to have an injector joint installed on the throttle body pointing 180° to the other direction, then this injector joint is optionally available (LINK).
● Another convenient benefit of this large throttle body type is that it's connected to the manifold with a rubber and 2 clamps, and not with 2 bolts such as the stock 110i and 125i throttle bodies.
It's convenient because this means that you don't need to worry anymore about the bolt distance and differences between the 110i and 125i manifold/throttle bodies, this 1 set will fit all 3-pin connector 110i and 125i engines perfectly.
If you are a professional, then this means that with this 1 type of throttle body and manifold, you can serve now both your 110i and your 125i customers.
※ Before you order, check and make sure that your stock throttle body has a 3-pin TP connector!
※ This throttle body type is available in 28mm, 30mm and 32mm...
● THIS 28MM THROTTLE BODY SET INCLUDES:
● THE Ø28MM 2021 TYPE THROTTLE BODY SET IS MENTIONED TO BE INSTALLED ON:
HONDA GEAR SHIFTED:
HONDA SCOOTER (AT):
SMART SHOPPER TIP:
※ BUYING MORE THAN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
All prices are in THB