Below are the available bulk discount rates for each individual item when you purchase a certain amount
35MM PGM-FI THROTTLE BODY UPGRADE SET
● If you want to take the full potential out of your 164cc or 175cc kit then the 35mm throttle body upgrade set is a real plus to allow your engine to suck in the air it needs at higher RPM's. We recommend to install the larger valves 150 head and dome piston in combination with the 35mm throttle body.
The result from a 164cc or 175cc Big Bore with this 35mm PGM-FI upgrade set installed is amazing with an improved acceleration and higher top speed as result!....
The venturi is machined in to a stack to create an optimised velocity and the set is Plug & Play ready to accept all your genuine SH125/150i - PCX125 V1/V2 and PCX150 V1 throttle body sensors.
For racing applications best performance will be achieved without air filter. For road use we recommend to modify the stock air filter with our Big Tube Air Intake Set.
If you install the A-Type high performance injector 16450-KWN-001 then you don't need to install a special electronic controller or anything else, the AFR ratio is spot on!..
This throttle body upgrade set can also be installed on:
● SCOOPY-i (2011)
● AIR BLADE i (2011)
● CLICK110i (2011 - 2012)
● WAVE125i / INNOVA125i (2007 - 2014)
**The 35mm Throttle Body can not be installed on your stock manifold.
● If you have a first generation PCX125, then you need to use the Yuminashi 17111-KWN-031A manifold for PCX125 which comes complete with a special rubber and clamps to make the install possible…
● If you have an 125cc or 150cc eSP engine, then you need to use the Yuminashi 17111-KZR-000SC B-Type manifold which comes complete with a special rubber and clamps to make the install possible…
-This throttle body can not be installed on a all-new 2014 PCX125 or PCX150 LED model!!...
All prices are in USD