Below are the available bulk discount rates for each individual item when you purchase a certain amount
● 98L FORGED CONNECTING ROD / 15-PIN (15 X 33 X 98)
● Custom length stroke-up forged connecting rod (98L) to be used with high performance and racing applications.
This connecting rod can only be used in combination with 15mm piston pin casted or forged pistons.
● The distance from center to center is 98mm (98L), the big-end inner diameter is 33mm, the small-end diameter is 15mm!...
※Installing this 98L conrod on the STD stroke crankshaft would make some really good power!
Just install a spacer gasket underneath, some longer studs, a longer cam chain, and your cylinder head would breathing much better because your piston spend more time at top dead center, you could use a shorter piston then to save some weight as well.
- Ø26X33X14 BIG END NEEDLE BEARING FOR STOCK STROKE CRANKSHAFT (LINK)
- SPL Ø26X33X14 BIG END NEEDLE BEARING (FOR OFFSET STROKER PINS) (LINK)
※ The forged connecting rods can not be installed with the stock/standard Honda Ø26 x 32 x 14mm needle bearings!...
● THE 06381-K26-098RX FORGED CONNECTING ROD CAN BE INSTALLED WITH A 15MM PISTON PIN PISTON ON THESE CRANKSHAFTS:
※ Keep in mind that you need to install additionally a piston with a 15mm piston pin in combination with this connecting rod!
SMART SHOPPER TIP:
※ BUYING MORE THAN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
All prices are in THB