Currency Displayed in
Below are the available bulk discount rates for each individual item when you purchase a certain amount
● YUMINASHI EVO 26 MANIFOLD
● If you have selected the right throttle body and big valve head for your build, then selecting the right manifold for your engine build is the next important step to take.
Choosing the “right” intake manifold for an engine is just as important as choosing the right camshaft, cylinder head and compression ratio.
All of these components have to complement one another and work in harmony together otherwise the engine will never realize its true power potential.
Most of the available manifolds have a inner diameter of 28mm (1.1023622 inches) at the throttle body side, and 25mm (0.984251969 inches) at the cylinder head side.
The Yuminashi EVO 26 manifold has been developed to make a smooth flow possible between a 31mm or 32mm throttle body and a 26mm (1.02362205 inches) intake port.
The rather short manifold was developed in such a way with the emphasis on horsepower, the outer diameter of the EVO 26 manifold has been made large enough with the engine tuner in mind.
This large outer diameter allows you to machine the inner diameter up until 33mm (1.2992126 inches) at the throttle body side, and 26mm (1.02362205 inches) to 33mm (1.2992126 inches) at the intake port side.
● The EVO 26 manifold is mentioned for the Yuminashi 31mm and 32mm throttle body with the injector in the throttle body installed (please visit the throttle body section).
The rubber which comes with the set is not an ordinary rubber but an insulator to block the heat between the manifold and the throttle body.
● THE YUMINASHI EVO 26 MANIFOLD IS MENTIONED TO BE INSTALLED ON:
SMART SHOPPER TIP:
※ BUYING MORE THEN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
All prices are in THB