Below are the available bulk discount rates for each individual item when you purchase a certain amount
|This product is available for pre-order only|
● YUMINASHI TYPE-1B (27/28MM) EVO MANIFOLD (MSX/MONKEY/CRF110F/...) FOR B-TYPE INJECTOR
● Choosing the “right” intake manifold for an engine is just as important as choosing the right camshaft, cylinder head and compression ratio, since all of these components have to complement one another and work in harmony together otherwise the engine will never realize its true power potential.
● The Yuminashi Type-1B manifold is plug & play ready to be installed on a 28mm intake port (0.984251969 inches) in combination with a stock style 125cc throttle body and B-type injector.
● The exact diameter of the Type-1 manifold at throttle body side is 28.6mm (1.12598425 inches), the diameter at the intake port side is 27.5mm (1.08267717 inches), and this to match the Yuminashi EVO143 Head which comes with the Yuminashi EVO143 big bore kit.
※ This manifold can be used in combination with the 28mm throttle body upgrade set LINK.
The Throttle Body Center Bolts set (LINK), which comes with the Type-1B EVO manifold set (17110-K26-EVO), must be used to install.
※ Keep in mind that this manifold is a B-type manifold mentioned for a B-type injector.
If your bike is produced before 2013, then there is a big chance you will have a A-type manifold and injector installed.
If this is the case, then you can find the correct B-type injectors for this manifold with this LINK, and the wire loom to connect the B-type injector to your A-type injector wire harness you can find with this LINK.
● THE YUMINASHI TYPE-1B EVO143 MANIFOLD IS MENTIONED TO BE INSTALLED ON:
SMART SHOPPER TIP:
※ BUYING MORE THEN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
All prices are in THB