Below are the available bulk discount rates for each individual item when you purchase a certain amount
● YUMINASHI TYPE-2B (25/34MM) MANIFOLD (FOR B-TYPE INJECTOR) (MSX/MONKEY/CRF110F/...)
● If you have selected the right throttle body and big valve head for your build, then selecting the right manifold for your engine build is the next important step to take.
Choosing the “right” intake manifold for an engine is just as important as choosing the right camshaft, cylinder head and compression ratio.
All of these components have to complement one another and work in harmony together otherwise the engine will never realize its true power potential.
● The Yuminashi Type-2 manifold is plug & play ready to be installed on a 25mm intake port (0.984251969 inches) in combination with a 31mm or 32mm throttle body.
● The exact diameter of the Type-2 manifold at throttle body side is 25mm (0.984251969 inches), the Type-2 manifold at throttle body side is 34mm (1.33858268 inches) and the maximum id to be machined is 35mm (1.37795276 inches) which we actually don't recommend to do so.
The short TYPE-2 manifold has been designed with horsepower in mind, and to create possibilities for the engine tuner such as deciding if you want to have the injector installed in the manifold (stock style), or in the throttle body.
● The injector joint which comes with the set gives you the choice to install it on the throttle body or on the manifold.
To install the injector in the throttle body you need the large 31mm and 32mm throttle bodies.
A black pin comes with the set to make it easy to block one of the two injector holes, and to install the injector joint based on your preference.
● The Yuminashi Type-2A and Type-2B manifolds are mentioned for the larger style throttle bodies which are easy to recognize with the large sensor block on the side.
The rubber which comes with the set is not an ordinary rubber but an insulator to block the heat between the manifold and the throttle body.
※ Keep in mind that this manifold set is a B-type manifold mentioned for a B-type injector.
If your bike is produced before 2013, then there is a big chance you will have a A-type manifold and injector installed.
If this is the case, then you can find the correct Type-2 A-type manifold with this LINK.
● THE YUMINASHI TYPE-2B (25/34MM) MANIFOLD IS MENTIONED TO BE INSTALLED ON:
SMART SHOPPER TIP:
※ BUYING MORE THEN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
All prices are in THB