Below are the available bulk discount rates for each individual item when you purchase a certain amount
● 100L FORGED CONROD SET / 13-PIN (13 X 30.1 X 100L)
● 100L Forged Connecting Rod Set with Ø25mm big end pin to be used as stock replacement for the old 110/125 Honda engines with high performance and racing applications, and all other engines as mentioned below to be powerful and stroked up with the right stroke/conrod ratio.
The benefit of this forged connecting rod is that it can handle a lot more, so it can be used in combination with big pistons, or forged pistons which are typically much heavier compared to cast pistons.
● The distance from center to center is 100mm (100L), the big-end inner diameter is 35mm, the small-end diameter is 14mm.
● THIS 100L FORGED CONROD SET INCLUDES:
- SPL Ø25X30.1X14MM BIG END NEEDLE BEARING (FOR OFFSET STROKER PINS) (LINK)
● THIS FORGED 13 X 30.1 X 100L CONNECTING ROD CAN BE INSTALLED ON:
※ Keep in mind that a longer stroke crankshaft and/or a longer connecting rod, will required an aluminium spacer to be installed underneath your cylinder, and that you will need to use 2 cylinder base gaskets, a longer cam chain and usually 2 extra dowel pins.
Keep also in mind that depending on the connecting rod length you are using, you will need to install most likely also 4 new, longer cylinder studs.
SMART SHOPPER TIP:
※ BUYING MORE THAN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
All prices are in THB